1.Turn cut-off valve clockwise rotation until it is completely close the valve of each tank. Verify that the two propane tanks have been completely shut down.

Two. Automatically to switch to Lpg Regulators pigtail to connect the hose. Insert the female fell down in the top of the entrance of the regulator hose thread male end. Wring their hands to the hose connector. Additional tightening instructions consultation of the manufacturer's instructions. Some accessories require additional quarter turn with a wrench. Repeat the process, attach the pigtail entrance.

One of a propane tank pigtail 3.Attach flare connector on the hose nozzle. The exact decoration may vary depending on your propane tank. Tight joints requires you only hand tighten the plastic collar. The metal tube may need an additional quarter turn with an adjustable wrench. Repeat the process, the other pigtail hose is connected to the propane tank.

4.Insert adjustment and hand tighten the bottom of the outlet of the outlet hose.

5.Attach export hose system. Exact instructions, depending on the type of system. For example, the barbecue may have a different connector than a water heater. Consultation on how to properly connect the outlet hose manufacturer's instructions. Under normal circumstances, the entrance of the nozzle hose connector screws in the same way, the regulator connected to the propane tank.

6.Open propane tank valve all the way. Close the valve counter-clockwise until they are completely open. According to the manufacturer's instructions, start the system. For example, barbecue usually requires you to open a dial-up inside the barbecue gas valve to open, then press a button to light the barbecue.